Key device for OPEL Corsa D 2006+

Image of Key device for OPEL Corsa D 2006+

Price: 560.00 €
Excl.Tax (20%)

Available: Yes

Quantity:
0

With this key device for Opel Corsa D 2006 + you can program transponder key or erase all transponder keys.

- Program transponder-key
- Erase all transponder-keys
Using the device
The device is easy to use and requires minimum user intervention.
Any information, that is required from the user before starting to use
the device can be provided by using the eight switches placed on the device.
The user can set the operation mode of the device by setting the switches in
different positions. For each functionality a specific combination of the positions
of the switches is required before starting to use the device. Any feedback from
the device to the user is provided using the green, red and yellow lamps placed
on the device.

How to Program transponder-key?

  1. To activate the function set switch 1, 9 nad 10 in position ON and switch all other switches  in position OFF.
  2. Plug in the key which you want to program and switch ignition on.
  3. Plug-in the device into the OBDII connector in the car.
  4. Wait until the operation is completed – refer to the section “Indications for the user”
  5. Turn ignition off
  6. Plug off the device from the OBDII connector
  7. If you want to program another key please repeat operations from step 2

How to erase all transponder-keys?

  1. To activate the function set switch 1, 8, 9 and 10 in position ON and switch all other switches to position OFF.
  2. Turn ignition on (engine off)
  3. Plug-in the device into the OBDII connector in the car
  4. Wait until the operation is completed – refer to the section “Indications for the user”
  5. Turn ignition off
  6. Plug off the device from the OBDII connector

NOTE:Switch 9 and switch 10 must be always in position ON.

Indications:

– Fast (4 Hz) blinking in red indicates operation in progress.

– Slow (1 Hz) blinking in green indicates that the operation is completed successfully.

Error indications:

Medium (2 Hz) asynchronous blinking in red and green indicate one of the following errors:

– wrong switch selection.

– failure during pin code extraction

– failure during entering security code into immobilizer

– failure during programming/erasing

Most Popular

VAG MQB key programming device

VAG MQB key programming device

1560.00 €

Key Device for Fiat

Key Device for Fiat

0.00 €