This is the new patent holding innovation called PROFESSIONAL DECODER SIP22.
In absolute every situation where the key is missing, Professional decoder SIP22 makes it possible to unlock & decode mainly Italian car models with SIP22 locks. No matter if the car has a SIP22 lock with 7 or 8 wafers, Professional decoder SIP22 manages to unlock and decode both types of SIP22 locks. This professional locksmith tool is mainly intended to be used on the car brands FIAT and ALFA ROMEO but works also on some other brands such as PEUGEOT, MASERATI, CITROEN, FORD, ABARTH, IVECO, LANCIA, GILERA, PIAGGIO BIKES and many more.
For more details on the product, please see the description below!
Description of Professional decoder SIP22
Whenever the key is absent, reopening cars with SIP22 lock types can become very difficult. Therefore, the one and only professional solution to open locked SIP22 locks quickly is mechanical tool called ‘’ Professional decoder SIP22. Although, SIP22 lock types can either consist of 7 or 8 wafers, this professional locksmith tool can manage to unlock and decode both different constructed lock types. Further it can be used on locks and ignitions while the direct use of Professional decoder SIP22 on the ignition is strongly NOT advisable!
The professional tool is constructed with 8 spaces and 5 depths and ensures a fast and non-destructive opening process of all types of SIP22 locks.
Professional decoder SIP22 is suitable for:
All about the unlocking process:
The general unlocking process is easy and quick. To ensure a smooth operation and the desired result there are four steps which need to be followed by the operator.
But before doing so, one needs to be familiar with the structure of the Professional decoder SIP22:
Professional decoder SIP22 is constructed with two main parts: The passkey (being on top of the Professional decoder SIP22) with its 8 pins, and the bottom part consisting of three parts being 1. Tension wheel, 2. Gate and 3. BACK wheel (listed in their hierarchical order from top to bottom).
As the name ‘’Tension wheel’’ suggests, the tension of the operator is during the unlocking process of highest importance. Here, the operator needs to find a ‘’middle tension’’ during the opening process since a weak tension would not lead to an unlocking of the SIP22 lock while a strong tension would only break or deform the tool.
The only thing one needs to do is to follow precisely four easy steps:
1. First step- Reset the Professional decoder SIP22:
Before starting the main unlocking process, there is one preparational step left: The resetting of the Professional decoder SIP22 or more precise the resetting of the pins on the tool!
For this step turn the BACK wheel all the way to the right and push the gate towards the tension wheel to close the gate. Then take the reset tool and push it down against each of the 8 holes of the Professional decoder SIP22. The operator should find the 8 holes on the upper part of the tool (the passkey)- 4 holes on the first side and another 4 on the other side. This procedure serves to reset the 8 pins. If all pins are aligned, the Professional decoder SIP22 is ready for the second step!
2. Second step- Inserting Professional decoder SIP22 into the lock:
For the second step one needs to push the gate towards the tension wheel to close the gate. Then the BACK wheel needs to be turned all the way to the right and lastly the Professional decoder SIP22 needs to be inserted into the given lock. Make sure that during the whole inserting procedure, the gate is fully closed! Once the Professional decoder SIP22 is in the lock, open the gate again by pushing it away from the tension wheel to lock it.
3. Third step- Gate on the right or wrong side?
For a smooth unlocking operation, it is very important to have inserted the Professional decoder SIP22 correctly. Therefore, to ensure the correct side, insert the Professional decoder SIP22 inside the SIP22 lock and push the BACK wheel.
In the case of a 8 wafers lock: If the gate pops out while pushing the BACK wheel, your Professional decoder SIP22 has been inserted incorrectly. In the case that the Gate has not popped out, you can continue with the fourth step, the main unlocking process.
In the case of a 7 wafers lock: If the gate does not pop out on both sides, you are dealing with a 7 wafers lock, meaning that you find the correct side differently.
Whenever you have inserted the decoder incorrectly into the lock, you will be able to turn the BACK wheel all the way to the left, without any resistance.
In case you feel a resistance from the wheel when turning it to the left, you are on the correct side. Then, you can continue with step 4.
4. Fourth step- the unlocking process:
On this stage you have already completed all preparational steps and the Professional decoder SIP22 is ready for the main unlocking procedure.
Therefore, the first step is to turn the tension wheel all the way to the left and to keep holding it there. While doing so, turn the BACK wheel to the left until the stop point is reached. Having reached the stop point, jiggle it a little bit before turning the BACK wheel into its original position (move it to the right). The following step is then to turn and hold the tension wheel to the right, while turning the BACK wheel to the left until the stop point is reached. If the stop point is reached, jiggle it again a little bit before turning it once again into its original position.
This procedure should be repeated 5 to 20 times. The result is an open SIP22 lock!
Looking for a more visualized way of the unlocking procedure? Then see below our full explanatory video!
What is in for you?
Shipment information of the product
After the successful completion of our customer’s desired order, the shipment duration takes about 1-4 days.
For additional information please contact firstname.lastname@example.org .
The company ’’Ivaylov’’ stands for its high product quality, its safe product shipments but most importantly for its reliability! Our highest goal is to produce unique locksmith tools for our clients which facilitate a quick and safe operational process!
Therefore, we test every tool for possible manufacturing mistakes. Additionally, all tools produced at our company carry a one year warranty. In cases of unintended small defects on our products, the company will repair them immediately- without any additional costs! If the tool seems to be unrepairable, compensation possibilities will be discussed with the customer. With this method we can guarantee happy customers receiving only good quality products.
Because only if we have fully satisfied our loyal customers, we have done our jobs right!