Step 1: Open the Gate by pulling it back
Step 2: Turn the turbo wheel all the way to the RIGHT
Step 3: With the reset tool push down (reset) the 8 pins
You have 4 pins on the one side and 4 pins on the other side of the tool
Start by pushing down the first 4 pins, then push down the other 4 pins on the other side
Step 4: After all pins are reset, close the Gate by pushing it in
Step 5: The TURBO wheel stays all the way to the right
Important!!! Every time when you insert the tool into the lock or you pull it out of the lock, the GATE must be closed (PUSHED IN) and the turbo wheel must be turned all the way to the right
Step 6: Insert the tool into the lock, hold it freely. If the Gate pops out – the tool is inserted on the WRONG SIDE
Step 7: Open the Gate by pulling it back
Step 8: Opening procedure: Start “pumping”- by turning the Tension wheel all the way to the Right, hold it and start moving the Turbo wheel to the left until you reach the end point (stop point), bring it again to the right, release the Tension wheel and then turn it to the Left. Repeat the procedure until the lock is opened.
Step 9: With HU100 if the operator doesn’t give a Lot of Tension, the unlocking will be impossible, so give a lot of tension.
Step 10: After you open the lock, turn the Turbo wheel to the left, close the Gate by pushing it in, and finally return the Turbo wheel all the way to the right.
Step 11: Remove the tool from the lock
You can check and the video instruction on our you tube channel: Professional decoders for car locks Bulgaria or in video section on our site