Price:
350.00 €
Excl.Tax (20%)
Available: Yes
This is the new patent holding innovation called Easy Tool Ivaylov VAG GROUP HU66 GEN 1.
In absolute every situation where the key is missing, Easy Tool Ivaylov VAG Group HU66 GEN 1 makes it possible to unlock & decode HU66 GEN 1 locks. This improved professional locksmith tool is intended to be used on VAG Group car models such as VW, AUDI, SKODA, SEAT, PORSCHE and others.
For more details on the product, please see the description below!
Description of Easy Tool Ivaylov VAG Group HU66 GEN 1
Whenever the key of a car with a HU66 GEN 1 lock is absent, the one and only professional solution to open locked HU66 GEN 1 locks quickly is our mechanical tool called ‘’Easy Tool Ivaylov VAG Group HU66 GEN 1’’. This professional tool is suitable on all VAG Group car models from 1998 until 2004 which include car brands such as VW, AUDI, SKODA (models up to 2014), SEAT, PORSCHE and others. Other than previous models, Easy Tool Ivaylov VAG Group HU66 GEN 1 works not only on car doors but also on the ignition (steering wheel) of VAG Group models from 1998 until 2014 – 2015.
All about the unlocking process:
The general unlocking process is easy and quick. To ensure a smooth operation and the desired result there are four steps which need to be followed by the operator.
But before doing so, one needs to be familiar with the structure of the Easy Tool Ivaylov VAG Group HU66 GEN 1:
Easy Tool Ivaylov VAG Group HU66 GEN 1 is constructed with two main parts: The passkey (being on top of the Easy Tool Ivaylov VAG Group HU66 GEN 1) with its 8 pins, and the bottom part consisting of three parts being 1. Tension wheel, 2. Gate and 3. BACK wheel (listed in their hierarchical order from top to bottom).
As the name ‘’Tension wheel’’ suggests, the tension of the operator is during the unlocking process of highest importance. Here, the operator needs to find a ‘’middle tension’’ during the opening process since a weak tension would not lead to an unlocking of the HU66 GEN 1 lock while a strong tension would only break or deform the tool.
The only thing one needs to do is to follow precisely four easy steps:
1. First step- Reset the Easy Tool Ivaylov VAG Group HU66 GEN 1:
Before starting the main unlocking process, there is one preparational step: The resetting of the Easy Tool Ivaylov VAG Group HU66 GEN 1 (the resetting of the pins on the tool).
For this step turn the BACK wheel all the way to the right and pull the gate back to open the gate. Then take the reset tool and push it down against each of the 8 holes of the Easy Tool Ivaylov VAG Group HU66 GEN 1 which you can find on the upper part of the tool (the passkey). This procedure serves to reset the 8 pins. Next, close the gate wheel by pushing it toward the tension wheel.
If all pins are aligned, the Easy Tool Ivaylov VAG Group HU66 GEN 1 is ready for the second step!
2. Second step- The tester key with its correct and wrong side
For the second step the operator needs to take the tester key. On the front, metal part of the tester key, the operator can find a green and a red dot. These two dots indicate later the right and wrong side of the tester key. When putting the tester key into the lock to check the right or wrong side, make sure that the two dots (green and red) are not far away from the edge of the lock. If the red dot touches clearly the edge of the lock, the tester key has been inserted correctly!
In case that the tester key has been inserted correctly, one needs to identify on which side of the rear part of the key there is a red dot (orientation point).
The direction of the orientation point indicates the way, in which the Easy Tool Ivaylov VAG Group HU66 GEN 1 should be later inserted into the lock in step 3.
3. Third step- Inserting Easy Tool Ivaylov VAG Group HU66 GEN 1 into the lock:
For the third step, before pushing the gate towards the tension wheel to close the gate, open it and make sure that the orientation point on the GATE of the Easy Tool Ivaylov VAG Group HU66 GEN 1 is pointed to the same direction as the orientation point on the tester key previously. Then the BACK wheel needs to be turned all the way to the right and lastly the Easy Tool Ivaylov VAG Group HU66 GEN 1 needs to be inserted with a closed gate into the given lock. Lastly, to round up this third step, the gate needs to be opened again by pushing it back towards the BACK wheel.
4. Fourth step- the unlocking process:
On this stage you have already completed all preparational steps and the Easy Tool IvaylovVAG Group HU66 GEN 1 is ready for the main unlocking procedure.
Therefore, the first step is to turn the tension wheel all the way to the right and to keep holding it there. While doing so, turn the BACK wheel to the left until the stop point is reached. Having reached the stop point, jiggle it a little bit before turning the BACK wheel into its original position. The following step is then to turn and hold the tension wheel to the left, while turning the BACK wheel to the left until the stop point is reached. If the stop point is reached, jiggle it again a little bit before turning it once again into its original position.
This procedure should be repeated 5 to 20 times. After that, another 5 to 20 times should be repeated, but this time BACK wheel reaching stop point 2. The result is an open HU66 GEN 1 lock!
Looking for a more visualized way of the unlocking procedure? Then see below our full explanatory video!
What is in for you?
Shipment information of the product
The company Ivaylov ensures their customers the fastest and safest delivery process thanks to their cooperation with 
!
After the successful completion of our customer’s desired order, the shipment duration takes about 1-4 days.
For additional information please contact info@ivaylov.com .
Why Ivaylov?
We are Ivaylov- the locksmith company who meets customers’ needs!
The company ’’Ivaylov’’ stands for its high product quality, its safe product shipments but most importantly for its reliability! Our highest goal is to produce unique locksmith tools for our clients which facilitate a quick and safe operational process!
Therefore, we test every tool for possible manufacturing mistakes. Additionally, all tools produced at our company carry a one year warranty. In cases of unintended small defects on our products, the company will repair them immediately- without any additional costs! If the tool seems to be unrepairable, compensation possibilities will be discussed with the customer. With this method we can guarantee happy customers receiving only good quality products.
Because only if we have fully satisfied our loyal customers, we have done our jobs right!
