Easy Tool Ivaylov HU100 Opel and Chevrolet

This is the new patent holding innovation called Easy Tool ivaylov HU100.

 

In absolute every situation where the key is missing, EasyTool Ivaylov HU100 makes it possible to unlock & decode HU100 locks. This professional locksmith tool is intended to be used on Opel and Chevrolet.  Additionally, it can be applicated on other car brands such as Vauxhall, Holden, BUICK, Saturn, Saab, Cadillac and General Motors.

EasyTool Ivaylov HU100 can be applied on doors, ignitions and trunks of car brands mentioned above.

For more details on the product, please see the description below!

 

EasyTool Ivaylov HU100

When the key is absent, HU100 lock types are very difficult to be opened unless you have our new invention called ’’EasyTool Ivaylov HU100’’ to hand.

This professional solution makes it possible to open locked HU100 locks in only a few seconds. This professional locksmith tool is constructed with 8 spaces and 4 depths. It works on all wafers simultaneously and ensures therefore a fast and non-destructive opening process of all types of HU100 locks.

With this way we ensure happy customers using our impressive invention!

 

Easy Tool Ivaylov HU100 is suitable for:

OPEL

 

• Opel Agila
• Opel Astra- from 2004 onwards
• Opel Combo Van- from 2004 onwards
• Opel Corsa- from 2002 onwards
• Opel Meriva- from 2004 onwards
• Opel Sintra
• Opel Tigra- from 2004 onwards
• Opel Vectra- from 2006
• Opel Zafira- from 2004
• Opel Insignia- from 2008 onwards

 

VAUXHALL

 

• Vauxhall Agila
• Vauxhall Astra- from 2004 onwards
• Vauxhall Combo Van- from 2004 onwards
• Vauxhall Corsa- from 2002 onwards
• Vauxhall Meriva- from 2004 onwards
• Vauxhall Sintra
• Vauxhall Tigra- from 2004 onwards
• Vauxhall Vectra- from 2006
• Vauxhall Zafira- from 2004
• Vauxhall Insignia- from 2008 onwards

 

HOLDEN

 

• Holden Astra- from 2004
• Holden Barina- from 2004 onwards
• Holden Combo- from 2004
• Holden Tigra- from 2005
• Holden Zafira- from 2006 onwards
• Holden Vectra- from 2006 onwards
• Holden Insignia- from 2008 onwards
• Most models of Holden from 2006 onwards

 

BUICK

 

• Buick Allure- from 2009
• Buick Lacrosse- from 2009

 

CHEVROLET

 

• Chevrolet Camaro- from 2009 onwards
• Chevrolet Equinox- from 2010 onwards
• Chevrolet Cruze- from 2007 onwards

 

SATURN

 

• Saturn Astra- from 2008 onwards

 

SAAB

 

• 93- from 2008 onwards
• 95- from 2008 onwards

 

CADILLAC

 

• Models from 2007

 

GENERAL MOTORS

 

• Terrain- from 2010

 

All about the unlocking process:

 

The opening methodology of the EasyTool Ivaylov HU100 is very quick and quite easy to learn. In order to ensure a smooth operation and the desired result we have prepared four easy steps which need to be followed.

But before doing so, one needs to be familiar with the structure of the EasyTool Ivaylov HU100:

EasyTool Ivaylov HU100 is constructed with two main parts: The passkey (being on top of the EasyTool Ivaylov HU100) with its 8 pins, and the bottom part consisting of three parts being 1. Tension wheel, 2. Gate and 3. BACK wheel (listed in their hierarchical order from top to bottom).

As the name ‘’Tension wheel’’ suggests, the tension of the operator is during the unlocking process of highest importance. Here, the operator needs to find a ‘’middle tension’’ during the opening process since a weak tension would not lead to an unlocking of the HU100 lock while a strong tension would only break or deform the tool.

The only thing one needs to do is to follow precisely four easy steps:

 

1. First step- Reset the Easy Tool Ivaylov HU100:

 

Before starting the main unlocking process, there is one preparational step left: The resetting of the EasyTool Ivaylov HU100 or more precise the resetting of the pins on the tool!

For this step turn the BACK wheel all the way to the right and push the gate towards the tension wheel to close the gate. Then take the reset tool and push it down against each of the 8 holes of the EasyTool Ivaylov HU100 which you can find on the upper part of the tool (the passkey). Here, the 8 holes on the passkey are separated into 4 holes on the first side and another 4 holes on the second side. This procedure serves to reset the 8 pins. If all pins are aligned, the Easy Tool Ivaylov HU100 is ready for the second step!

 

2. Second step- Inserting Easy Tool Ivaylov HU100 into the lock:

 

For the second step one needs to push the gate towards the tension wheel to close the gate. Then the BACK wheel needs to be turned all the way to the right and lastly the EasyTool Ivaylov HU100 needs to be inserted into the given lock. Make sure that during the whole inserting procedure, the gate is fully closed! Once the EasyTool Ivaylov HU100  is in the lock, open the gate again by pushing it away from the tension wheel to lock it. By doing this, you secure the EasyTool Ivaylov HU100 with the lock so that you can start with step three.

 

3. Third step- Gate on the right or wrong side?

 

For a smooth unlocking operation, it is very important to have inserted the EasyTool Ivaylov HU100 correctly. Therefore, to ensure the correct side, insert the EasyTool Ivaylov HU100 inside the HU100 lock and push the BACK wheel.

If the Gate pops out while pushing the BACK wheel, the EasyTool Ivaylov HU100 has been inserted incorrectly. In the case that the Gate has not popped out you can continue with the fourth step, the main unlocking process.

 

4. Fourth step- the unlocking process:

 

On this stage you have already completed all preparational steps and the EasyTool Ivaylov HU100 is ready for the main unlocking procedure.

Therefore, the first step is to turn the tension wheel all the way to the left and to keep holding it there. While doing so, turn the BACK wheel to the left until the stop point is reached. Having reached the stop point, jiggle it a little bit before turning the BACK wheel into its original position (move it to the right). The following step is then to turn and hold the tension wheel to the right, while turning the BACK wheel to the left until the stop point is reached. If the stop point is reached, jiggle it again a little bit before turning it once again into its original position.

This procedure should be repeated 5 to 30 times. The result is an open HU100 lock! Once you’ve opened the HU100 lock further decoding is quite easy to do.

Looking for a more visualized way of the unlocking procedure? Then see below our full explanatory video!

 

What is in for you?

 

• Quick unlocking and decoding process
• Simple handling
• Professionally unlocking and decoding HU100 locks
• No damages

 

Shipment information of the product

 

The company Ivaylov ensures their customers the fastest and safest delivery process thanks to their cooperation with   !

After the successful completion of our customer’s desired order, the shipment duration takes about 1-4 days.

For additional information please contact info@ivaylov.com .

 

Why Ivaylov?

 

We are Ivaylov- the locksmith company who meets customers’ needs!

The company ’’Ivaylov’’ stands for its high product quality, its safe product shipments but most importantly for its reliability! Our highest goal is to produce unique locksmith tools for our clients which facilitate a quick and safe operational process!

Therefore, we test every tool for possible manufacturing mistakes. Additionally, all tools produced at our company carry a one year warranty. In cases of unintended small defects on our products, the company will repair them immediately- without any additional costs! If the tool seems to be unrepairable, compensation possibilities will be discussed with the customer. With this method we can guarantee happy customers receiving only good quality products.

Because only if we have fully satisfied our loyal customers, we have done our jobs right!